狠狠操av,亚洲中文无码AV永久伊人,国产精品国产三级国产AV麻豆,五月婷婷丁香

撥號18861759551

你的位置:首頁 > 技術文章 > 非軸拋物面鏡的粗糙度

技術文章

非軸拋物面鏡的粗糙度

技術文章

Roughness of Diamond Turned Off-Axis Parabolic Mirrors

Single Point Diamond Turning is a manufacturing technique for producing off-axis parabolic (OAP) mirrors, off-axis elliptical (OAE) mirrors, and other precision metal optical components. While the goal of any optical manufacturing technique is to create an ideal surface that does not deviate from its theoretical surface profile, Diamond Turning, like other manufacturing techniques, is subject to manufacturing errors that prevent the ideal surface from being produced. These surface errors can typically be classified by their frequency content, specifically as low, mid, or high spatial frequency errors.

 

Spatial Frequency Errors

Low spatial frequency errors, described by terms like surface figure, irregularity, and even Zernike polynomials, force an incoming wave to deform and take on a wavefront similar to the profile of the optic. Mid spatial frequency errors, or ripples, are typically caused by a tool removing or shaping material on a surface. Mid frequency errors occur periodically with roughly the same spacing as the stepping distance of the tool used to alter the surface, and can adversely affect image quality.

 

High spatial frequency errors, often referred to as roughness and measured in Angstrom RMS, tend to cause light to scatter unintentionally. The greater the error, the wider the potential scatter angle. This form of scattering is wavelength dependent and scatter angles increase as the wavelength of incident light is decreased.

 

In metal manufacturing processes, roughness is often associated with the “shininess” of a part. The surface of rough parts typically appear hazy or cloudy, but if a part is particularly rough, a greater percentage of light will deviate from its intended target. When a rough surface is used as a focusing optical element, an overall decrease in the MTF of an image occurs. Rough surfaces can even lead to an overall decrease in throughput.

 

Diamond Turning

Diamond turned optical components are polished differently than traditionally manufactured optical components. Diamond turning is a manufacturing technique that allows for the creation of unique and precise non-spherical glass and metal shapes, but suffers from the possibility of poor surface roughness. If care is not taken during design and diamond turning, a surface can have a roughness of hundreds of Angstroms (Å). Because scatter in the high frequency domain is wavelength dependent, a roughness of a few hundred Å may be unsuitable for visible light applications, whereas little to no scatter may exist for systems operating in the Infrared (IR). When optics are carefully designed and skillfully diamond turned, surface roughness less than 100 Å can be achieved. With a lower surface roughness, an optic will have minimized scatter in the visible spectrum. However, if an application utilizes light from the lower end of the visible spectrum, or even the Ultraviolet (UV), 100 Å may present an unacceptable level of scatter. The roughness of the highest precision diamond turned components can be brought below 50Å and can be further improved by nickel plating a surface. It is generally accepted that polished glass will have a roughness of between 20-50 Å.

 

The figures below provide a visualization of the difference between a surface with <50 Å roughness and a surface with <100 Å roughness.

Figure 1: Surface Map of <50 Å RMS Roughness

Figure 2: Surface Map <100 Å RMS Roughness

 

Edmund Optics’ optical design and diamond turning staff are experienced at minimizing roughness and other errors introduced in the diamond turning process. Along with our standard offering of diamond turned mirrors, customized solutions are available including custom sizes and shapes and a variety of metal mirror coatings. Contact us today to speak with an expert or receive a quote.

聯系我們

地址:江蘇省江陰市人民東路1091號1017室 傳真:0510-68836817 Email:sales@rympo.com
24小時在線客服,為您服務!

版權所有 © 2025 江陰韻翔光電技術有限公司 備案號:蘇ICP備16003332號-1 技術支持:化工儀器網 管理登陸 GoogleSitemap

在線咨詢
QQ客服
QQ:17041053
電話咨詢
0510-68836815
關注微信
免费A级毛片无码A∨免费软件| 欧美精品欧美极品欧美激情 | 欧美日韩国产高清| 国产99视频精品免费视看9| 国产成人无码AV| 一区二区久久| 青青草一区| 亚洲AV无码一区二区二三区软件| 中文字幕无码日韩欧免费软件| 综合自拍亚洲综合图区欧美 | 日韩精品亚洲人成在线观看| 久青草影院在线观看国产| 五月婷婷综合| 夜色网站| 夜色阁亚洲一区二区三区| 狠狠躁夜夜躁人人爽天天2020| 国产精品久久久久这里只有精品| 国产裸体歌舞一区二区| 九九精品在线| 久久精品人妻少妇一区二区| 青青草免费视频| 精品一区二区三区免费播放久久| 97色伦图片97综合影院| 国产精品污WWW在线观看| 24小时免费观看在线视频| 宜兰县| 欧美少妇xxx| 性色a∨亚洲一区二区三区老狼 | 久久久精品人妻一区二区三区| 国产精品无码久久久久久久久久| 久久久久中文伊人久久久| 丹江口市| 蜜桃成熟33d| av性天堂| 精品国产乱码久久久久夜深人妻| 中文字幕在线2021一区| 亚洲精品无码mv在线观看网站| 性一交一乱一色一视频| 一本色道久久99一综合| 精品视频国产狼友视频| 欧美人妻日韩精品|